|
| -
|
| • Super
H8DMU+ |
|
• Dual 1207-pin sockets support up to two AMD
Opteron™ 2000 series processors
|
| • NVIDIA
nForce MCP55 Pro |
• Sixteen
240-pin DIMM sockets
• Supports up to 64GB DDR2 667 MHz memory
• Dual channel memory bus
• For Single CPU: Memory must be populated in CPU1
DIMMs only
• For Dual CPUs: Recommended that memory be populated
equally in adjacent memory banks
• DDR2 667/533/400MHz buffered (registered) ECC
SDRAM, 240-pin gold-plated DIMMs
• Memory Voltage 1.8 V only
• Corrects single-bit errors
• Detects double-bit errors (using ECC memory) |
• 1 Universal
I/O (UIO) Slot
• 1 (x8) PCI-E Full-height / Full-length Slot |
SATA
• NVIDIA MCP55 Pro SATA2 3.0Gbps Controller
• 6 SATA Ports
• nVidia RAID 2.0
• SATA RAID 0, 1, 0+1, 5, JBOD Support
IPMI
• Support for Intelligent Platform Management Interface
v.2.0
• 200-pin IPMI slot (SIMSO)
• (Optional: AOC-SIMSO(+))
• Remote Management Module
• (Add-on Cards not included)
Network Controllers
• nVidia MCP55 Pro Chipset Dual-port LAN / Ethernet
Controller
• Supports 10Base-T, 100Base-TX, and 1000Base-T,
RJ45 output
Graphics
• ATI ES1000 graphics controller
Super I/O
• Winbond 83627HF |
Serial
ATA
• Six SATA2 Ports
IDE
• Single EIDE channel support up to two UDMA IDE
devices
• Supports UDMA Mode 5
• Supports PIO Mode 4
• Supports ATA 100/133
Floppy
• 1 Floppy port, 1.44 MB
LAN
• 2 RJ45 LAN ports
USB
• FUCI
• Up to 6 USB Ports 2.0 Compliant, 1.1 Compatible
• 2 Rear Ports
• 4 Internal Headers
VGA
• 1 VGA port
Keyboard / Mouse
• PS/2 keyboard and mouse ports
Serial Ports
• 1 Fast UART 16550 serial port
• 1 header
Others
• 1 UID |
• 1U Rackmount
• Height 1.7" (43mm)
• Width 17.2" (437mm)
• Depth 25.6" (650mm) |
• 4x 1"
Hot-swap SAS/SATA drive bays
• Slim DVD drive option
• Slim Floppy drive option |
Fans
• 4x 4cm counter-rotating fans |
• Redundant
650W AC power supply w/ PFC
• AC Voltage 100 - 240V, 60-50Hz, 8-4 Amp
• +5V - 25 Amp
• +5V standby - 3 Amp
• +12V - 54 Amp
• -12V - 0.5 Amp
• +3.3V - 12 Amp |
Buttons
• Power On/Off button
• System Reset button
• UID button
LEDs
• Power LED
• Hard drive activity LED
• 2x Network activity LEDs
• UID LED
Ports
• 2x USB Ports + DB9 COM Port (Optional in place
of FDD) |
CPU
• Monitors CPU Core Voltages, +3.3V, +5V, ±12V,
+5V Standby, HyperTransport Link voltage, memory
voltage, VBAT, Chipset voltage
• CPU 4-Phase-switching voltage reulator
Fans
• Total up to 8-fan status tachometer monitoring
• Up to two 4-pin and six 3-pin fan headers
• Status monitor for speed control
• Status monitor for on/off control
• Low noise fan speed control
Temperature
• Monitoring for CPU and chassis environment
• CPU Thermal Trip Support
• Thermal Control for 8x Fan Connectors
• I2C Temperature Sensing Logic
LEDs
• CPU / System Overheat LED
• Suspend-State Indicator LED
• +5V Standby Alert LED
• UID/Remote LED
Other Features
• Chassis Intrusion Header
• Chassis Intrusion Detection |
• 8Mb Flash
EEPROM with AMI® BIOS
• Plug and Play (PnP)
• APM 1.2
• DMI 2.3
• PCI 2.2
• ACPI 2.0
• BIOS Rescue Hot Keys
• USB Keyboard Support
• Hardware BIOS Virus Protection
• SMBIOS 2.3 |