|
| • Intel® Server Board S5520SC |
• Dual LGA1366 Sockets
• Supports up to two Intel® Xeon® Processors 5500 series on Next-Generation Intel® Microarchitecture (Nehalem)
|
| • Intel® 5520 chipset with Intel® ICH10R chipset
|
| • 4.8GT/s, 5.86GT/s and 6.4GT/s
|
Memory Capacity
• 12 DDR3 DIMM sockets (Registered or Unbuffered)
• 6 channel native (800/1066/1333 MHz)
RAS Features
• Channel-Independent Mode
• Channel-Mirroring Mode
• Demand Scrubbing Mode
• Patrol Scrubbing Mode
|
• 2 PCI Express 2.0 x16 slots (x16 mechanical)
• 1 PCI Express 1.0 x4 slot (x8 mechanical shared w/ optional SAS module)
• 1 PCI Express 1.0 x1 slot (x4 mechanical)
• 1 PCI 32/33 5V slot |
• Six SATA ports (3 Gbps) via ICH10R with Intel® Embedded Server RAID Technology
• Modular SAS RAID solution via Intel® I/O Expansion Module Options |
Integrated
• Intel® Embedded Server RAID Technology with host-based SW RAID levels 0/1/10; Optional SW RAID 5 with activation key
Optional
• Intel® SAS Entry RAID Module AXX4SASMOD with RAID 0, 1, 1E, 10, 5 (optional) and Intel® RAID Controller SROMBSASMR4I with RAID 0, 1, 5, 6, 10, 50 and 60
• Validated Intel® RAID Controllers |
| • Embedded Intel® Dual Gigabit Controller 82575EB with Intel® Virtualization Technology |
|
• Onboard Server Engine* LLC Pilot II* Controller with 64 MB DDR2 memory, 8MB allocated to graphics |
• 7.1 channel audio support based on Realtek* ALC889 with 16/20/24-bit S/PDIF support
- External audio connections through rear I/O
- One internal 3-pin S/PDIF connector
- One internal 2x5-pin audio connector |
• Two IEEE 1394a ports through Texas Instruments* TSB43AB22A
- One external IEEE 1394a port through rear I/O
- One internal 2x5-pin IEEE 1394a connector |
• External connections:
- RJ-45 serial port A connection
- One DH 10 serial port connector (optional)
- Two RJ-45 NIC connectors for 10/100/1000 Mb connections
- Four USB 2.0 ports at the back of the board
- 7.1 channel audio connections
- One IEEE1394a connector
• Internal connections:
- Two 9-pin USB headers, each supports two USB 2.0 ports
- One DH10 serial port B header
- Six SATA connectors at 1.5 Gbps and 3 Gbps
- Four SAS connectors at 3 Gbps (optional)
- One SSI-compliant 24-pin front control panel header |
Integrated IPMI 2.0 baseboard management controller
• Fan speed control
• Diagnostic LEDs
• Temperature monitoring and recovery
• SMASH CLP (command line interface)
• Email alerting
• Power management with Intel® Intelligent Power Node Manager
Optional Intel® Remote Management Module (RMM3)
• KVM & Virtual Media redirection
• Dedicated 3rd NIC
• Remote Power on/off
• Embedded Web UI
• Event log and configuration |
Intel® Deployment Assistant 3.0
• Wizard based UI to deploy, configure and update server
• BIOS, BMC and RAID array configuration
• Unattended OS install
• Online patch updates
Intel® Server Management Software 3.X
• View critical or warning events
• Power on/off/reset
• View sensor (fan speeds, temperature, power)
• Full IPMI 2.0 interface
• Chassis Intrusion detection
• Serial Over LAN (Text Console Redirection) |
Intel® SC5650WS
Form Factor
• Pedestal, convertible to 6U rack
Drive Bays
• Support for up to a total of six 3.5” fixed or hot swap SAS/SATA drives
Peripheral Bay(s)
• Media Bays (2 x 5.25”) & (1 x 3.5”)
System Cooling
• Three non-redundant cooling fans:
- 1 tool-less 120-mm chassis fan
- 1 tool-less 120-mm PCI fan
- 1 tool-less 92-mm drive bay fan
Power Supply
• Non-redundant 1000-watt high-efficiency PFC power supply with integrated cooling fan
Tool-less Features
• Peripheral bays, fixed hard drive bay, system fans, PCI slots, and optional hot-swap bays
Front Panel Features
• 2x USB connectors
• Security lock
• Optional support for Intel® Local Control Panel
Pedestal Dimensions (H x W x D)
• 17.8” (452 mm) x 9.256” (235 mm) x 19” (483 mm)
Rack Dimensions (H x W x D)
• 9.256” (235 mm) x 17.6” (447 mm) x 19” (483 mm) |