| Colfax CX2250-XF4 2U Rackmount Server | ||||||||
|
||||||||
Available CX2250-XF4 Models
Model |
CPU |
Chipset |
Memory |
HDD |
Expansion |
Power Supply |
Onboard IB |
| CX2250-XF4-6026TT-GTRF | 2x 2-way Intel® Xeon® Processors 5600/5500 Series | Intel® 5500 | 2x 192GB DDR3 RDIMMs | 2x 6 Hot-Swap 3.5” SATA | 1 PCI Express 2.0 x16 | 1400W High-Efficiency Redundant | N/A |
| CX2250-XF4-6026TT-GIBXRF | 2x 2-way Intel® Xeon® Processors 5600/5500 Series | Intel® 5520 | 2x 192GB DDR3 RDIMMs | 2x 6 Hot-Swap 3.5” SATA | 1 PCI Express 2.0 x16 | 1400W High-Efficiency Redundant | Mellanox ConnectX DDR Infiniband 20Gbps Controller |
| CX2250-XF4-6026TT-GIBQRF | 2x 2-way Intel® Xeon® Processors 5600/5500 Series | Intel® 5520 | 2x 192GB DDR3 RDIMMs | 2x 6 Hot-Swap 3.5” SATA | 1 PCI Express 2.0 x16 | 1400W High-Efficiency Redundant | Mellanox ConnectX QDR Infiniband 40Gbps Controller |
Intel, the Intel logo, Xeon, and Xeon Inside are trademarks or registered trademarks of Intel Corporation in the U.S. and other countries.
Features
Intel, the Intel logo, Xeon, and Xeon Inside are trademarks or registered trademarks of Intel Corporation in the U.S. and other countries.
Technical Specifications
| Per Node | |
| Motherboard | • Supermicro X8DTT-HF+ / -HIBXF+ / -HIBQF+ |
| CPU |
• Dual LGA1366 Sockets • Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below: - Intel® Xeon® Processor X5600/E5600/L5600 Series (Westmere) 40W - 130W - Intel® Xeon® Processor X5500/E5500/L5500 Series (Nehalem-EP) 38W - 95W |
| Chipset | • Intel® 5500 or 5520 • Intel® ICH10R |
| Intel® Quick Path Technology | • Up to 6.4GT/s |
| Memory |
• 12 240-pin DIMM sockets • Supports up to 192 GB 1333 / 1066 / 800MHz DDR3 ECC Registered memory • DIMM sizes 1GB, 2GB, 4GB, 8GB, 16GB • Memory Mirroring supported • Corrects single-bit errors • Detects double-bit errors (using ECC memory) • Supports Intel® x4 and x8 Single Device Data Correction (SDDC) |
| Expansion Slots | • 1 PCI-Express 2.0 x16 for double-width GPU |
| Storage |
• Six SATA ports (3 Gbps) via ICH10R • Supports SW RAID 0, 1, 5, 10 |
| Infiniband |
• Mellanox ConnectX DDR Infiniband 20Gbps Controller w/ QSFP connector (X8DTT-HIBXF+) • Mellanox ConnectX QDR Infiniband 40Gbps Controller w/ QSFP connector (X8DTT-HIBQF+) |
| IPMI |
• IPMI 2.0 with virtual media over LAN and KVM-over-LAN support • Winbond® WPCM450 BMC |
| Integrated LAN | • Dual Intel® 82574L Gigabit Ethernet controller • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output • Intel® I/OAT 3 support for fast, scaleable, and reliable networking • VMDq support for better performance of virtualization • 1x Realtek RTL8201N PHY (dedicated IPMI) |
| Integrated Graphics | • Matrox G200eW graphics controller with 8 MB DDR2 memory |
| Super I/O | • Winbond 83527HG chip |
| Input / Output |
SATA • Six SATA ports • 6 SATA hard drives supported LAN • 2x RJ45 LAN ports • 1x RJ45 Dedicated IPMI LAN port USB • 2 rear + 1 header (2 Ports) • Total 4 USB 2.0 Compliant VGA • 1x VGA Port Serial Port • 1 Fast UART 16550 serial port Infiniband • 1 External QSFP Infiniband connector (HIBXF+ / HIBQF+ Model) |
| Manageability |
Software • IPMI 2.0 with KVM support • NMI • Watch Dog • SuperDoctor III Power Configurations • ACPI Power Management • Main Switch Override Mechansim • Power-on mode for AC power recovery |
| PC Health Monitoring |
CPU • Monitors for CPU Cores,+1.5V, +3.3V, +5V, +12V, +5 Stdby, +3.3 Stdby, VBAT, Memory Voltages • CPU Core 6-Phase-switching voltage regulator Fans • Total of four 4-pin PWM fans • 4x fans with tachometer monitoring • Status monitor for speed control • Status monitor for on/off control • Low noise fan speed control Temperature • Monitoring for CPU and chassis environment • CPU thermal trip support • Thermal Control for 4x Fan Connectors • PSU I2C temperature sensing logic • Thermal Monitor 2 (TM2) support • PECI LED • Power Fail / Overheat LED • Suspend-state Indicator LED • UID LED Other Features • SDDC Support |
| BIOS |
• 32Mb SPI Flash EEPROM with AMI® BIOS • Plug and Play (PnP) • PCI 2.2 • ACPI up to 3.0 • USB Keyboard support |
| Chassis | Supermicro 6026TT-GTRF / GIBXRF / GIBQRF Form Factor • 2U Rack Drive Bays • 12 x 3.5" hot-swap SATA drive bays (6 for each node) System Cooling • 4x 80mm PWM cooling fans Power Supply • Redundant 1400W high-efficiency power supply with PMBus Dimensions (H x W x D) • 3.5” ( 89mm) x 17.2" (437mm) x 28.5" (724mm) Rear I/O (per node) • 2 USB, VGA, COM, 2 LAN Ports, InfiniBand w/ QSFP Interface (HIBXRF / HIBQRF Model) Front Panel Features (per node) • Buttons - Power On/Off button - UID button • LEDs - Power status LED - UID LED - Network activity LEDs - System Overheat/fan fail/power fail LED |
Images
